Spiral Metal Boning

This metal spiral wire boning is similar to polyester boning but is more rigid and bends in 2 directions - ideal on curvy seams particularly in the bust area. To cut the wires you will need a heavy duty wire cutter. The cut ends of the spiral wire will be sharp but can be sealed with metal end caps. Please note the spiral wire sometimes retains some of the lubrication from manufacture and therefore we advise that it is wiped prior to use.

7mm diameter. Available by the metre.

N.B. We recommend the use of safety glasses when cutting wire.

This product is classified as an 'article' and therefore by law does not require a safety data sheet under current legislation.